Care And Maintenance; How To Clean The Incubator; Guarantee; Standards Of Reference - Fiem SMART Manual De Uso

5 . C A R E A N D M A I N T E N A N C E
To be guaranteed a perfect and durable working of the machine, observe the following dispositions:
• don't expose the unity to atmospheric agents;
• don't use the incubator in particularly hot, damps or cold locals;
• make the moving and the storage avoiding the bumps or falls, they would result deleterious for a sure wor-
king of the same;
• before the cleaning operations take off the plug from the electric network;
• don't strain the electric cable when the unity is moved;
IMPORTANT: take off the electric plug grasping the same and not straining the cable; besides don't use unsu-
itable extensions and not to safety rule;
• Regarding the cleaning and disinfection operations follow attentively the instructions herewith:

HOW TO CLEAN THE INCUBATOR:

In order to guarantee an essential hygiene during the incubation it is suggested to clean the incubator before
and after sing;
therefore pass a dampened cloth over the machine and don't use any substances that could damage the sur-
face of the unity, so disinfect it using light disinfectants.
Make the cleaning also on the bottom and by a sponge with a normal detergent of domestic use.
ATTENTION: DO NOT USE CORROSION DETERGENTS
NOTICE: after each cleaning and disinfection operation swicth on the machine for about two hours without
water, in order to eliminate the accumulated damp during the incubation and the cleaning, in this it will made
sure the correct working to the following using.
6 . G U A R A N T E E
The machine is already tested by the builder in every its part before the delivery.
Therefore the builder does not assume any liability for damages direct or indirect caused during the transport,
including those to electric/electrical plants caused by an improper machine use or improper connection to the
electric power net. The guarantee includes repairs or replacement of all the parts that are found to be defective
in the 24 months following the delivery of the machine to the customer (12 months by the manufacturer + 12
months by the seller) and applies when the customer informs the manufacturer, no later than the eighth day from
when the fault occurred. This Guarantee is referred to possible defects in work-manship and it is excluded in
any case of improper use, improper placement and connection or in any case of tampering from not authorized
personal. The guarantee includes all technical telephone support, but the customer is liable for all shipping costs
for sending all defective parts to be replaced to F.I.E.M. S.r.l. and all technical call-out. The warranty does not
cover any indemnity due to machine stop or damages pertinent to hatchability (eggs not hatched).
All the reparations must be directly effected by the authorized personal by the builder; contrariarly, the
warranty stops.

STANDARDS OF REFERENCE

This product conforms to the essential Electromagnetic and safety requirements foreseen by the following
directives: • 2014/35/UE (LVD)
• 2014/30/UE (EMC)
as designed in accordance with the requirements of the following Harmonized Standards
• EN 55014-1:2006 + A1:2009 + A2:2011
• EN 55014-2: 2015
The conformity to the above requirements is attested by
The mark has been introduced in 1995 year.
It is opportune underline the following actions that can predjudge the conformity and moreover the product
characteristics:
• uncorrect electric supply;
• uncorrect installation or uncorrect /improper use or not conform to the instructions reported into the instruc-
tion book supplied with machine;
• replacement of its components with those not conform or adopted by the builder, or replacement effected
by not authorized technical servic
• WARNING: THIS EQUIPMENT MUST BE EARTHED
• EN 61000-3-3:2013
• EN 61000-3-2:2014
marking on the product;
15