Publicidad
Idiomas disponibles
Idiomas disponibles
4
Power on
1
Upon first power-on of the endpoint, follow the on-screen setup wizard to configure
language, time, network, etc., to initialize the configuration. The initialization opera-
tions vary with software versions.
After the endpoint is started for the first time or restored to factory settings, go to set-
tings on the touchscreen to configure the admin password (default password:0000).
5
LED Status
Roll green light
from inside to
Status
outside at the
same time
• Booting
Description
• Shutting down
6
Power outage
8
2
3
Slow-
Rolls green
ly-flash-
light from left
ing green
• Firmware
Sleep
mode
• Factory
Turn the rocker switch button on the right rear of the
endpoint to "O" to turn off the endpoint.
1. Insert the end of the power cable into
the power port of the endpoint.
2. Insert the power cord plug into the
outlet.
3. Turn the rocker switch button on the
right rear of the endpoint to "I" to turn on
the endpoint.
Flashing
red
to right
upgrading
Abnormal
resetting
Off
Solid green
• Power
off
Unmuted
• Not in a
during a call
call
Solid red
Muted
during a call
Publicidad
