ULTIMATE SPEED ULGD 5.0 C1 Traducción Del Manual De Funcionamiento Original página 93

into contract with the sulphuric acid, flush the
affected body region with plenty of clear, run-
ning water and seek medical advice at once!
Avoid electrical short circuits when connecting
„
the car and motorcycle battery charger to the
battery. Connect the minus pole connection
cable only to the minus pole of the battery or
the car body. Connect the plus pole connec-
tion cable only to the plus pole of the battery!
Before connecting to the mains, verify the
„
mains power has the required 230 V~ 50 Hz,
a 16 A fuse and an ELCB switch (earth leak-
age circuit breaker)! Otherwise, the device
can be damaged.
Do not use the car and motorcycle battery
„
charger near any fires, heat and long-term
temperatures above 50 °C! For higher
temperatures, the output power of the car
and motorcycle battery charger will drop
automatically.
Only use the car and motorcycle battery
„
charger with the original parts it was
delivered with!
Do not cover the car and motorcycle battery
„
charger with any objects! Otherwise, the
device can be damaged.
Protect the electrical contact surfaces of the
„
battery from short circuit!
Only use the car and motorcycle battery
„
charger for the charging and maintenance
charging of undamaged 6 V-/12 V-lead
batteries (with electrolyte solution or gel)!
Otherwise, property damage may be the
consequence.
Do not use the car and motorcycle battery
„
charger for the charging and maintenance
Safety instructions
GB/MT 93