Mobiclinic VIRGO Manual De Instrucciones página 21

FR IT
ES EN
TROUBLESHOOTING
To check the Self-Diagnostic Warning Light, turn on the key and count the number of flashes
Flash Description
1 Low Battery
2 Low Battery
Fault
3 High
Fault
4 Current Limit
Time-Out
5 Park Brake Fault Either a park brake release switch is active or the park brake is faulty.
6 Throttle OONA-
PU
7 Speed Pot Fault The throttle, speed limit pot or their associated wiring may be faulty.
8 Motor Voltage
Fault
9 Other error
DE PT NL
SWE
The batteries are running low.
•Recharge the batteries
Battery charge is empty.
• Recharge the batteries.
Battery Battery voltage is too high. This may occur if overcharged &/or traveling
down a long slope.
• If traveling down a slope, reduce your speed to minimize the amount of
regenerative charging.
• Check the battery and associated connections and wiring.
The motor has been exceeding its maximum current rating for too long. This
may be due to a faulty motor.
• Check the motor and associated connections and wiring.
• Turn the controller off, leave for a few minutes and turn back on again.
• Check the park brake and associated connections and wiring.
• Ensure any associated switches are in their correct positions.
The Throttle is out of neutral when turning the controller on.
• Ensure the throttle is in neutral when turning the controller on.
• The Throttle may require re-calibration.
• Check the throttle and speed pot and associated connections and wiring
The motor or its associated wiring is faulty.
• Check the motor and associated connections and wiring.
The controller may have an internal fault.
• Check all connections & wiring
PL DK
Meaning
Instruction Manual Libra