Instruction Manual Libra
The Free-Wheeling Lever (L1) will let you change the Mode of your scooter (Manual Mode or Automatic Mode).
The Manual mode will let you move the scooter without energy, you will be able to push it, whereas the Automatic
Mode will let you drive the scooter and immobilize it when you want to park it.
You will fi nd some stickers next to the lever, they will help you to know the Mode of your scooter.
If you would like to change from Manual Mode to Automatic Mode, you must turn off the scooter. After changing
the Mode, you will be able to turn on again your scooter.
OPERATING YOUR SCOOTER
Before operation, please remove the Lock Nut (A) and press button of Circuit Breaker (L) to activate the system.
1.Before operating your scooter, check the following:
free-wheeling device on D speed dial is at the turtle picture.
2.Sit on sco oter and turn on key (C). The Battery Gauge light
should be lit in the green, yellow, and red color zones.
The Self-Diagnostic Warning Light should not be blinking.
3. When your hands rest comfortably on the handlebars,
the thumb
control levers should be within easy reach. The right lever
moves the
scooter forward, the left one moves it backward. When you
release both levers the scooter will stop.
4. Steer the scooter by turning the whole steering column the way you want to go.
5. Practice driving where there are no obstacles. Start at the slowest speed and drive forward and backward; make
some turns. As you get more comfortable you can increase the speed by turning the speed dial toward the picture
of the rabbit.
6. If two Battery Gauge LED Lights be lit, you should plan to recharge the batteries very soon.
7. If the scooter stops, locate the circuit breaker (L) on the top of the battery pack. Push it and try the scooter again.
8. When you are fi nished riding, turn off the key before getting off .
9. If you are fi nished riding for the day, immediately recharge the batteries.
FR
IT
EN
ES
(A)
DE
PT
NL
SWE
(L)
PL
DK