Descargar Imprimir esta página

Klarstein VINSIDER 36 Manual De Instrucciones página 29

Ocultar thumbs Ver también para VINSIDER 36:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Special notes on correct use
This device is intended exclusively for the storage of wine.
This appliance is not intended for use as a built-in appliance unless explicitly
stated in the instructions.
This appliance is not suitable for freezing food.
The racks were pre-set to allow the most efficient use of energy.
Note: It is recommended to set the temperature to 12 °C. If the temperature
is set too high, the wine may spoil. If the temperature is set too low, the power
consumption could increase.
Special notes on the shelves
The shelves have been pre-set to allow the most efficient use of energy.
Only use the shelves provided by the manufacturer.
Never block the holes in the shelves or use any other types of shelves that
have not been approved by the manufacturer, which may cause poor cooling
or increase energy consumption.
We recommend that you use the shelves as shown so that the energy is used
as efficiently as possible.
Notes on ambient temperature
Install this unit in a location where the ambient temperature corresponds to the
climate class indicated on the unit's rating plate.
Extended
SN
temperate
N
Temperate
ST
Subtropical
T
Tropical
The ambient temperature influences the internal temperature of the wine
refrigerator. For optimal operation of the wine refrigerator, we recommend an
ambient temperature of 23°C to 25°C.
This cooling unit is intended for use at ambient
temperatures of 10-32 °C.
This cooling unit is intended for use at ambient
temperatures of 16-32 °C.
This cooling unit is intended for use at ambient
temperatures of 16-38 °C.
This cooling unit is intended for use at ambient
temperatures of 16-43 °C.
EN
29

Publicidad

loading

Este manual también es adecuado para:

100412861004128710041288