Klarstein VINSIDER 36 Manual De Instrucciones página 32

EN
32
Installing the handle
The handle is delivered in a separated package with screws
together inside the carton.
1. Reveal two small holes on the door frame from inner side
by pulling out a bit the door seal.
2. Aim the handle to the holes and insert the screws from
inside.
3. Screw them up with screw-driver.
4. Put back door seal to cover the screws.
Reversing the door
The wine cooler is delivered with the door opening from left to right. To reverse
the opening direction.
1
Open the door at 90 degrees and keep
it steady.

Unscrew the M5*16 screws,
dismantle the right upper hinge
and remove the door.
2
Unscrew the M5*16 screws
dismantle the right lower hinge
3
Remove the drill-hole cover

,

,

.

.