Ecler CA40 Manual De Usuario página 37

TYPE PARAM1 PARAM2
DATA POWER ON / STANDBY
PRESET_NUMBER <Preset Number>
PRESET_DONE
OUTPUT_MODE <Output Mode>
ZONE_LABEL <Zone Label>
MUTE ON/OFF
MASTER_VOL <Volume Level>
INPUT <Input Name>
VOL <Input Name>
BASS <Input Name>
TREBLE <Input Name>
GATE <Micro Name>
GATE_THRESHOL <Micro Name>
D
TALKOVER_ASSIG <Micro Name>
N
TALKOVER_PRIORI <Micro Name>
TY
TALKOVER_THRES <Micro Name>
HOLD
TALKOVER_ATTA <Micro Name>
CK
TALKOVER_RELEA <Micro Name>
SE
TALKOVER_DEPTH <Micro Name>
PARAM3 PARAM DESCRIPCIÓN
4
Shows the current amplifier POWER status
Shows the current PRESET NUMBER
Shows that the last SET LOAD_PRESET n command has been processed: the
preset is loaded and active
Shows the current amplifier OUTPUT MODE
<Zone> Show the current LABEL (name) for the specified ZONE
<Zone> Shows the current MUTE status for the specified ZONE
<Zone> Shows the current MASTER VOLUME for the specified ZONE
ON/OFF <Zone> Shows the status (ON/OFF) for the specified INPUT at the specified ZONE
<Volume <Zone> Shows the current VOLUME for the specified INPUT at the specified ZONE
Level>
<Tone Level> <Zone> Shows the current BASS LEVEL for the specified INPUT at the specified ZONE
<Tone Level> <Zone> Shows the current TREBLE LEVEL for the specified INPUT at the specified ZONE
ON/OFF Shows the current NOISE GATE status (ON or OFF) for the specified MIC INPUT
<Threshold Shows the current NOISE GATE THRESHOLD LEVEL for the specified MIC
Level> INPUT
<Assign Value> Shows the current TALKOVER ASSIGN for the specified MIC INPUT
<Priority Shows the current TALKOVER PRIORITY for the specified MIC INPUT
number>
<Threshold Shows the current TALKOVER THRESHOLD LEVEL for the specified MIC INPUT
Level>
<Attack Time Shows the current TALKOVER ATTACK TIME for the specified MIC INPUT
Value>
<Release Time Shows the current TALKOVER RELEASE TIME for the specified MIC INPUT
Value>
<Depth Level> Shows the current TALKOVER DEPTH (attenuation) for the specified MIC INPUT
37