Ecler CA40 Manual De Usuario página 50

DAM614
TYPE PARAM1
GET ALL
INFO_MODEL
INFO_VERSION
AUTOLOAD_PRESET1
PRESET_NUMBER
PRESET_NAME
REMOTE_MODE
REMOTE_INPUTS
REMOTE_ZONES
DISPLAY_MODE
LCD_CONTRAST
EXT_MUTE_ZONES
IN_LABEL
IN_STEREO
IN_MUTE
IN_VOL
IN_BASS
IN_MID
IN_TREBLE
HPF_ACTIVE
HPF_FREQUENCY
PARAM2 PARAM3
<Preset=P1:P20>
<Preset=T1:T9>
<Remote=R1:R4>
<Remote=R1:R4>
<Remote=R1:R4>
<Input=I1:I6>
<Input=I3:I6>
<Input=I1:I6>
<Input=I1:I6>
<Input=I1:I6>
<Input=I1:I6>
<Input=I1:I6>
<Input=I3:I6>
<Input=I3:I6>
PARAM DESCRIPCIÓN
4
Dumps current device status (with DATA messages)
Gets the Device model name
Gets the current Firmware Version
Gets the current AUTOLOAD_PRESET1 at Startup function
Gets the current PRESET number
Gets a certain PRESET (from P1 to P20) or TEMPLATE (from T1 to T9) name
Gets the working mode for a certain REMOTE port (from R1 to R4)
Gets the list of inputs affected by the working mode of a certain REMOTE port
(from R1 to R4)
Gets the list of outputs affected by the working mode of a certain REMOTE port
(from R1 to R4)
Gets the current LCD DISPLAY MODE
Gets the current LCD DISPLAY CONTRAST level
Gets the outputs to be muted by an external contact closure, connected to the
MUTE port
Gets the current LABEL (name) for the specified INPUT
Gets the current STEREO link status (ON or OFF) for INPUTs 3 and 4
Gets the current MUTE status (ON or OFF) for the specified INPUT
Gets the current VOLUME for the specified INPUT (general input volume,
affecting all the post processing)
Gets the current BASS tone LEVEL for the specified INPUT
Gets the current MIDDLE tone LEVEL for the specified INPUT
Gets the current TREBLE tone LEVEL for the specified INPUT
Gets the current HIGH PASS FILTER status (ON or OFF) for the specified INPUT
Gets the current HIGH PASS FILTER frequency (Hz) for the specified INPUT
50