Descargar Imprimir esta página

Ecler CA40 Manual De Usuario página 59

Ocultar thumbs Ver también para CA40:

Publicidad

Idiomas disponibles

Idiomas disponibles

IN_VOL
<Input=I1:I6>
IN_BASS
<Input=I1:I6>
IN_MID
<Input=I1:I6>
IN_TREBLE
<Input=I1:I6>
HPF_ACTIVE
<Input=I3:I6>
HPF_FREQUENCY
<Input=I3:I6>
FBS_ACTIVE
<Input=I3:I6>
GATE_ACTIVE
<Input=I3:I6>
GATE_THRESHOLD
<Input=I3:I6>
GATE_DEPTH
<Input=I3:I6>
GATE_ATTACK
<Input=I3:I6>
GATE_HOLD
<Input=I3:I6>
GATE_RELEASE
<Input=I3:I6>
TALKOVER_ACTIVE
<Input=I3:I6>
TALKOVER_MODE
<Input=I3:I6>
TALKOVER_PRIORITY
<Input=I3:I6>
TALKOVER_ZONES
<Input=I3:I6>
<Volume=0:99>
<Gain=dBx10>
<Gain=dBx10>
<Gain=dBx10>
ON/OFF
<Frequency=Hz>
ON/OFF
ON/OFF
<Threshold=dBx10>
<Depth=dBx10>
<AttackTime=ms>
<HoldTime=ms>
<ReleaseTime=ms>
ON/OFF
PAGER/DUCKER
LOW/HIGH
<Zones=ZA:ZD>
59
Shows the current VOLUME for the specified INPUT (general input
volume, affecting all the post processing)
Shows the current BASS tone LEVEL for the specified INPUT
Shows the current MIDDLE tone LEVEL for the specified INPUT
Shows the current TREBLE tone LEVEL for the specified INPUT
Shows the current HIGH PASS FILTER status (ON or OFF) for the
specified INPUT
Shows the current HIGH PASS FILTER frequency (Hz) for the specified
INPUT
Shows the current FEEDBACK SUPPRESSOR feature status (ON or
OFF) for the specified INPUT
Showss the current NOISE GATE status (ON or OFF) for the specified
INPUT
Shows the current NOISE GATE THRESHOLD LEVEL (dBx10) for the
specified INPUT
Shows the current NOISE GATE DEPTH (attenuation when gate is
closed, dBx10) for the specified INPUT
Shows the current NOISE GATE ATTACK TIME (milliseconds x10) for
the specified INPUT
Shows the current NOISE GATE HOLD TIME (milliseconds x10) for the
specified INPUT
Shows the current NOISE GATE RELEASE TIME (milliseconds x10) for
the specified INPUT
Shows the current TALKOVER status (ON or OFF) for the specified
INPUT
Shows the TALKOVER function working mode (PAGER or DUCKER)
for the specified INPUT
Shows the current TALKOVER PRIORITY level (LOW or HIGH) for the
specified INPUT
Shows the current TALKOVER assignment to outputs (ZONES) for the
specified INPUT

Publicidad

loading