Basic Operation; Standby/On; Auto-Standby / Auto-Wake Feature; Select Modes - Hisense U5120GW Manual Del Usuario

7. Basic Operation

7.1 Standby/ON

When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
State Action
On
Semi
Press
Standby
once
Eco
Press and
Standby
hold
5 seconds
• Disconnect the mains plug from the mains socket
if you want to switch the unit OFF completely.

7.2 Auto-Standby / Auto-Wake Feature

• [Auto-Standby] Your soundbar has been
programmed to enter Standby mode
automatically when no audio is detected for
15 minutes. For example, this would happen
when pausing playback, or should the
soundbar be left on accidentally.
• [Auto-Wake] If a TV or an external device is
connected (COAXIAL/OPTICAL socket), the
unit will switch on automatically when the
TV or the external device is switched on.
To disable this feature, please follow the steps
below:
1. During ON mode, pointing the remote at the
soundbar, press and hold the
seconds to open the menu.
- The unit's display will scroll "MENU".
2. Press the button 6 times in succession ：
the display shows: Auto Wake [ON / OFF].
or
Press the button 7 times in succession,
the display shows: Auto Standby [ON / OFF].
Select the content with VOL +/- button on the
3.
remote control, and then press
your selection and exit the settings.
• Repeating these steps will toggle the feature
"ON" and "OFF".
16
Function
• Follow source state
• Wi-Fi is still on.
• It still supports Play-Fi and
Airplay2.
• Wi-Fi is off.
• The product enters the lower
power consumption mode.
• Restarting the system will
take a relatively longer time.
button for 3
to confirm

7.3 Select Modes

• Press the (SOURCE) button repeatedly on
the unit or on the remote control to select
the OPTICAL, COAXIAL, HDMI ARC, HDMI 1,
HDMI 2, BT (Bluetooth) and USB mode.
• Press the button on the remote control to
select the BT (Bluetooth) mode.
• The selected mode will show on the display.
Display
Note
Play-Fi is not an optional source. Play-Fi needs
to be directly controlled by app.

7.4 Adjust the Bass/Treble Level

Press the BASS +/- buttons on the remote
•
control to adjust bass level (bass +5 ~ bass -5).
• Press the TREBLE +/- buttons on the remote
control to adjust treble level (treble +5 ~
treble -5).

7.5 Turn the Surround Sound ON/OFF

Press the SURR button on the remote control
•
to turn on the surround sound. Press this
button again to turn off the surround sound.

7.6 Adjust the Volume

Press the VOL+ / VOL- buttons on the unit or
•
on the remote control to adjust the volume.
• If you wish to turn the sound off, press the
(MUTE) button on the remote control.
Press the (MUTE) button again or press
the VOL+ / VOL- buttons to resume normal
listening.

7.7 Adjust the Brightness

- Press the DIMMER +/- button on the remote
control to select brightness level.
Mode
ARC
HDMI IN 1
HDMI IN 2
OPTICAL
COAXIAL
Bluetooth
Connected
Connection
USB