Select Equalizer (Eq) Effect; Set The Audio Delay (Av Sync); Factory Reset; Dts: X Operation - Hisense U5120GW Manual Del Usuario

7.8 Select Equalizer (EQ) Effect

While playing, press the EQ button on the
•
remote control to select desired preset
equalizers: MUSIC, MOVIE, NEWS, SPORT,
NIGHT, GAME, AI EQ.

7.9 Set the Audio Delay (AV SYNC)

• Video image processing, sometimes longer
than the time required to process the audio
signal. This is called "delayed. " Audio Delay
feature is designed to remedy this delay.
• Set the audio delay, provided only for the
current playback mode. (As provided in
the HDMI ARC audio delay mode, the delay
mode is valid only for the HDMI ARC).
- By default, the audio delay is set to 00.
1. During ON mode, press and hold the
button for 3 seconds to open the menu, then
press the button 9 times in succession.
The unit's display will scroll " LT 00".
Press the VOL+/- buttons will be a 10 ms
2.
frequency hopping to adjust the delay time.
Set 200 ms maximum delay.
3. Press the button or exit settings 10S.
Tip:
• Adjustment range: [00~200ms]
• The audio delay setting is only valid for
digital audio (eg HDMI IN, HDMI ARC,
COAXIAL, OPTICAL).

7.10 Factory Reset

Reset device to default setting
In standby mode, press the [
•
BASS-] buttons on the remote control them
in sequence, the display shows "RESET" to
reset the factory default settings of the host.
• Set is ON, press and hold the
until the display shows "RESET" to reset the
Wi-Fi module to the factory default settings.

8. DTS: X Operation

8.1 Neural:X / DRC / Dialog Control
Feature
- DTS:X® technologies provide users with
virtual multi-channel virtual surround effects,
creating an immersive audio volume.
1. During ON mode, pointing the remote at the
soundbar, press and hold the
seconds to open the menu.
2.
3.
4.
-
9. OPTICAL / COAXIAL / HDMI /
1
2
3
4
Tip:
, VOL+,
,
•
(MUTE) button
•
button for 3
The unit's display will scroll "MENU".
Neural:X Setting: Press the
times in succession ： the display shows: Dts
Neural [ON / OFF].
or
DRC Setting: Press the
in succession, the display shows: Dts Drc
Heavy / Dts Drc Mid / Dts Drc Min.
or
Adjust the Dialog Control: Press the
button 13 times in succession, the display
shows: Dts Dialog Control 0~6.
Select the content with VOL +/- buttons on
the remote control, and then press
confirm your selection and exit the settings.
Repeating these steps will toggle the feature
ON and OFF.
ARC Operation
Ensure that the unit is connected to the TV or
audio device.
Press the (SOURCE) repeatedly on the
unit or on the remote control to select the
OPTICAL, COAXIAL, HDMI 1, HDMI 2, HDMI
ARC mode.
Operate your audio device directly for
playback features.
Press the VOL +/– button to adjust the
volume to your desired level.
The unit may not be able to decode all digital
audio formats from the input source. In this case,
the unit will mute. This is NOT a defect. Ensure
that the audio setting of the input source (e.g. TV,
game console, DVD player, etc.) is set to PCM or
Dolby Digital (Refer to the user manual of the
input source device for its audio setting details)
with HDMI IN 1 / HDMI 2 / HDMI ARC / OPTICAL /
COAXIAL input.
When selecting a different audio format, the
unit will display the following as follows:
Audio (abbreviation)
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
button 11
button 12 times
to
Display
PCM AUDIO
PCM AUDIO
PCM AUDIO
DOLBY AUDIO
17