Product Description; Installation - Qilive Q.5660 Manual Del Usuario

3. PRODUCT DESCRIPTION

1. Filter
2. Filter protector
3. Dust cup
4. Main body release button
5. Tube
6. Power switch
7. Handle
8. Dust cup release button
9. Main body
10. Ventilation openings
11. Battery pack
12. Indicator light

4. INSTALLATION

Note: This handstick vacuum cleaner is not a free-standing unit and in-between uses
must always be placed in the wall bracket, or laid flat on the floor in a suitable location,
so it does not become a trip hazard or can be stepped on. Keep the appliance away from
children and pets.
4.1 Mounting the wall mounting braket
The product is designed to sit in the wall mounting bracket vertically.
1. Select an installation position located in the proximity of the electrical outlet.
2. Place the wall mounting bracket against the mounting surface. Mark the centers of
two holes.
3. Move the wall mounting bracket. Then, use an electric drill with a 6mm drill bit to
punch two holes in the marked positions.
Note: Do not drill into any pipes or mains cables beneath the surface during mounting
holes preparation. The fixing points must be capable of supporting the full weight of the
product.
4. Fit plastic toggle anchors in the holes (not in set).
5. Fix the wall mounting bracket to the wall and tighten two M4x20 screws.
6. Hang the appliance.
4.2 Assembling the handstick vacuum cleaner
1. Insert the tube into the floor nozzle connector, by pressing it in until it clicks securely
into place.
2. Insert the main body into the top of the tube, by pressing it in until it clicks securely
into place.
1
13. Charging slot
14. Suction power button
15. Battery pack release button
16. Adapter
17. Wall mounting bracket
18. Floor nozzle release button
19. Round brush nozzle
20. Roller brush release button
21. Roller brush
22. LED light
23. Crevice nozzle
24. Motorised pet tool
2
11 11
EN