Water Softener; Detergent Use - cecotec BOLERO AGUAZERO 1006 COMPACT Manual De Instrucciones

- Any other type of salt may damage the salt softener. In case of damage caused by the use
of unsuitable salt, Cecotec does not give any guarantee and is not liable for any damage
caused.

4.2 Water softener

- This dishwasher is equipped with a water softener which uses a salt compartment
specifically designed to reduce water hardness.
- To find out the hardness level of your tap, you can contact your water company or use a
test strip
- You must set the water softener manually according to the water hardness in your area,
to do so use the water hardness dial. The goal is to optimise and customise the salt
consumption level.
Water hardness table
Water hardness
0-50
50-100
100-150
150-200
200-300
300-400
More than 400
The factory setting is H3.
Setting the water softener
1. Close the door. Turn the device on.
2. In the next 60 seconds, hold down the Start/Pause icon more than 5 seconds to enter the
water softener setting mode.
3. Press the Start/Pause icon again to select the proper setting according
to your local
"H1H2H3H4H5H6H7H8H9HAHbHCHdHEHFH1"
4. Do not press any icon for more than 5 seconds or press the power button to complete the
setting and exit this mode.

4.3 Detergent use

Use only detergents designed specifically for household dishwashers. Keep the detergent
-
in a cool, dry place and out of reach from children.
area, the setting
Level
HE-HF
H7-Hd
H5-H6
H4
H3
H2
H1
will change following
AGUAZERO 1006 COMPACT/SILVER
ENGLISH
this sequence:
67