STARLINK Pivot Mount Manual Del Usuario página 9

INSTALLATION INSTALLATION
Instructions
10. Orient arm to be within 5 degrees of vertical.
11. Rotate knob clockwise until tight to lock in arm
position. Verify joint is tight.
12. Disconnect the cable from the Starlink.
Route the cable from the house's interior.
13. Place the Starlink into the carrying bag and
carry to the install location, reconnect the cable to
the Starlink.
14. Place the mast of the Starlink into the hole at the
center of the mount.
15. Use wall clips to fasten the cable to the
wall along your route. Avoid puncturing
cable and sharp bends, and follow
horizontal / vertical lines.
ENGLISH ENGLISH
14.