Preparing For Use - Wiesenfield WIE-CS-120 Manual De Instrucciones

4 - heater
5 - heater securing plate
6 - tap
7 - rubber feet
8 - thermostat
9 – LED (indicating power supply)
10 - on/off switch
11 - yellow LED (heating signalling)
12 - power cable
13 - temperature limiter
1 - power plug
2 - power supply LED
3 - thermostat
4 - heater
5 - heating LED
3.2.

Preparing for use

APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 10 cm distance between each
side of the device and the wall or other objects. The device should always be used
when positioned on an even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental and sensory functions.
Position the device such that you always have access to the power plug. The
power cord connected to the appliance must be properly grounded and
correspond to the technical details on the product label.
The machine should be located so that the access to all sides of the machine and
its elements is not difficult. This will enable efficient servicing of the machine and
secure its cleanliness for sanitary purposes.