Introduction; Technical Data - Titan GM 3600 Instrucciones De Uso

INTRODUCTION

2
INTRODUCTION
In the air assisted/airless spraying process, the spraying material is atomized at pressures between
400 – 1800 PSI (3 – 12.4 MPa). The atomizing air at 7 – 32 PSI (0 – 0.22 MPa) produces a soft spray
jet that eliminates problems of overlaps in the boundary zone. The soft spray jet prevents the
spraying material from rebounding to the gun. The form air reduces or increases the spray jet
width, depending on the adjustment of the air adjustment knob. Due to the cleaning-friendly
design of the tip and the lack of air holes near the material outlet, the tip is virtually self-cleaning.
When the trigger of the gun is pulled, the air valve opens allowing atomizing and fan jet air to flow
up to the tip. The material valve opens only when the trigger is pulled to its fullest extent.
The amount of air for the spray jet width is adjusted using the air adjustment knob. The air input
should be adjusted at the source to approximately 0 – 32 PSI (0 – 0.22 MPa).
Air Adjustment
Knob
Trigger Lock
Air Inlet Fitting
Material Inlet Fitting
Model 2412194
ADVANTAGES OF THE ADJUSTABLE AIR ASSISTED/
AIRLESS PROCESS:
•
high coverage capability
•
low overspray
•
fine finish
•
adjustability of spray pattern width
MATERIALS THAT CAN BE SPRAYED USING THIS GUN
INCLUDE:
•
Water, oil, and solvent based primers and topcoats
•
Fine finishing enamels and automotive coatings
•
Release agents
6
Gun Hook
Gun Body
Tip Guard
Flat Tip
Trigger
Material and
Filter Tube
Air Adjustment
Knob
Trigger Lock
Air Inlet Fitting
Material Inlet Fitting
Model 2404548
2.1

TECHNICAL DATA

Maximum air input pressure 115 PSI (0.79 MPa)
Maximum working pressure 3600 PSI (24.8 MPa)
Air connector
Material connector
Filter, standard
Length
Height
Weight
Reversible Tip Spray Gun
Flat Tip Spray Gun
GM 3600
Atomizing Air
Atomized
Material
Pattern Air
(flat tip only)
Gun Hook
Gun Body
Reversible Tip
Tip Guard
Trigger
Material and
Filter Tube
QD Nipple
NPSM 1/4"
100 mesh (see chart on page
11 for available filter sizes)
8.5" (216 mm)
9.8" (250 mm)
1 lb. (420 g)
P/N 2404548
P/N 2412194