Publicidad
Step 16
å
Turn two BLACK 9/16" FLAT HEAD SCREWS (32S) into the
MODESTY PANEL (E) until the shoulders of the SCREWS rest on the
surface of the MODESTY PANEL.
å
NOTE: Do not overtighten the SCREWS.
å
Slide the MODESTY PANEL MOLDING (T) onto the MODESTY
PANEL (E). Line up the grooves in the MOLDING over the heads of
the SCREWS in the MODESTY PANEL.
å
NOTE: The MOLDING should be centered on the MODESTY PANEL.
å
NOTE: If the MOLDING comes up off of the SCREWS, remove it and
slide it on again.
Page 22
BLACK 9/16" FLAT HEAD SCREW
(2 used in this step)
E
427287
32S
T
Shoulder
Apply pressure with your hands as you
guide the MOLDINGS over the SCREWS
and onto the MODESTY PANEL.
www.sauder.com/service
Publicidad
