Publicidad
Step 41
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D24 and D25).
å
Fasten a DRAWER RIGHT (40CC) to the RIGHT DRAWER SIDE (D24) and a
DRAWER LEFT (40CD) to the LEFT DRAWER SIDE (D25). Use four GOLD
5/16" FLAT HEAD SCREWS (3S) through holes #2 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole
in the SLIDE.
å
Fasten one PULL (35K) to the DRAWER FRONT (L). Use two
BLACK 7/8" MACHINE SCREWS (37S).
3
4
37S
BLACK 7/8" MACHINE SCREW
(4 used for the PULLS)
www.sauder.com/service
Roller end
1
2
D25
L
35K
GOLD 5/16" FLAT HEAD SCREW
(8 used for the SLIDES)
427287
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
10A
D24
3
4
3S
Center the screw in the oval hole.
5
x2
Roller end
1
2
Drawer Slide
Page 47
Publicidad
