Cleaning And Care - Gaggenau AH 320-701 Instrucciones De Utilización Y De Montaje

Cleaning and care

Fig. . . . . 13 Fig Fig 13 13 13
Fig Fig 13
Fig. . . . . 14 Fig Fig 14 14 14
Fig Fig 14
8
F
The grease filter saturation display
F F F F F flashes after an operating time of
30 hours to indicate to you that you
should clean the grease filter.
The metal grease filter can be
removed easily for cleaning (Fig.
13).
The grease filter can be cleaned at
any time, even if the grease filter
saturation display should not start to
flash.
Grip the handle of the grease filter
and slide it towards the rear. Then
pull the filter downwards out of the
holder; repeat the operation until
you have removed all grease filters.
The metal grease filters can be
cleaned in a dishwasher at a
maximum temperature of 65°C,
where it should be supported
vertically to allow food or rinsing
residues to drain off.
After having cleaned them, re-insert
the grease filters in the wall
extractor in reverse order.
Press the F F F F F button (Fig. 14): this will
reset the timer to zero and turn off
the saturation indicator light for the
filter.