Important; Using Your Appliance; Filling The Water Tank - Di4 Jet Pressing Healthy 8b Manual De Instrucciones

IMPORTANT

Carefully read through the operating instructions for the appliance and safeguard them for future
reference.
This appliance has been designed exclusively for normal household use in a home environment.
This appliance must be used only for the purposes for which it was designed, i.e. as an iron. Any
other use will be considered improper and consequently dangerous. The manufacturer will not be held
responsible for any damage arising from misuse or improper use.
This appliance is to be connected and used in accordance with the information stated on its
characteristics plate.
This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension
cable, make sure that it is suitable for 16A and has a socket with an earth connection.
The appliance must never be placed directly under the tap to fill the water tank.
The electrical plug must not be removed from the socket by pulling the cable.
Never immerse the iron in water or any other fluid.
Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.)
This appliance reaches high temperatures and produces steam during use, this could cause scalds or
burns if not used properly.
Do not allow the power cable to come into contact with the soleplate when it is hot.

USING YOUR APPLIANCE

1. Filling the water tank

This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other liquids, such as perfume, vinegar, starch,
condensation water from tumble dryers or air conditioning systems, or chemicals will damage the
appliance. Any damage caused by the use of the aforementioned products will make the guarantee void!
1. Open the filling lid (12).
2. Fill the water tank. Never fill beyond the level "max" (11) for maximum filling!
3. Close the filling lid.
Refill the water tank when the indicator light (4) comes on. Three beeps will be heard.
Important: Once refilled, press button (4).
Tip: To prolong the optimum steam function, you may mix tap water with distilled or demineralised water
1:1. If the tap water in your area is very hard, mix tap water with distilled or demineralised water 1:2.
2. Heating
1. If your steam station is equipped with an iron lock system (14*), release the iron by pressing the
button.
2. Unwind the steam hose (6) and the mains cable (7). Plug mains cable into an earthed socket.
3. Turn programme selector (1) to choose the kind of fabric to be ironed.
4. Press the button (2) to switch the appliance on. Indicator lights (2, 16*) will flash indicating that the
appliance is heating up.
5. When the iron is ready to use, the indicator lights (2, 16*) will remain permanently lit. Two beeps will
be heard.
EN
21