Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Descaling the iron
1. Fill the tank (10) with tap water.
2. Plug in the mains cable (7) and press the button (2) to switch the appliance on.
3. Press the descaling button (3) for 2 seconds. Its indicator light will remain permanently lit.
4. Wait until the indicator light (2) stops flashing and remains lit permanently. Two beeps will be heard.
Hold the iron in a horizontal position over an empty sink to collect the water.
5. Press the steam release button (15) for 2 seconds. The descaling process will start automatically.
Warning: boiling water and steam will be released through the soleplate, carrying limescale
and/or deposits that may be inside. During the process, a beep will be heard every 5 seconds.
6. After approximately 3 minutes, the iron will stop releasing steam. A long beep will be heard, indicating
that descaling process has finished. The appliance will switch off automatically.
7. To clean the soleplate (17), immediately rub off any residue by running the hot iron over a wet cotton
cloth.
2. Cleaning the appliance
Regularly clean your appliance for properly maintenance. Attention! Burn risk!
1. If the appliance is only slightly soiled, wipe it with a damp cotton cloth only, and then dry it.
2. If the cloth is synthetic, it may melt due to the high temperature on the soleplate. Switch the steam off
and rub off any residue immediately with a thickly folded, damp cotton cloth.
3. To keep the soleplate smooth, you should avoid contact with hard metal objects. Never use a
scouring pad, or chemicals to clean the soleplate.
STORING THE APPLIANCE
1. Unplug the appliance and let it cool down. Empty the water tank (10).
2. Place the iron on the steam station, standing on the pad (13).
If your steam station is equipped with iron lock system (14*), fix the iron to it. First insert the heel and
then block the tip moving the lock system against the iron.
3. Store the steam hose (6) and the mains cable (7) on the storage holder (8).
24
Publicidad
