B.A. International BA45 Instrucciones De Uso página 34

6453505.book Seite 32 Donnerstag, 21. April 2016 4:59 16
5 Operation
D
E
F
32
4. Clamp the bur instrument by turning the center part of the handpiece
in direction (D) until it reaches the stop.
 When the screw and the marks (E) line up with one another, the
bur instrument is clamped.
 When using handpiece bur instruments with a reduced shank:
always make sure that the reduced shank does not come into
contact with the opening for the chuck (F).
5. Pull and turn the bur instrument to check that it is firmly seated.
Removing the pin
1. Screw in the supplied tool (A).
A
2. Open the clamping system.
3. Pull out the pin.
Operating Instructions BA ULTIMATE Kit
64 53 505 D3551.201.04.02.02