Correct Use - Montolit F1 BROOKLYN Instrucciones Para El Uso

8 CORRECT USE - 90°
1
2
6
8
9
• Position the tile against the square. Lock the tile with Squeeze System (fig. 6/7).
• Press down to switch the driving handle and lock it.
• The correct position of the hands is shown in figure 10.
• Proceed to cutting by slowly positioning the diamond disk against the material to be cut, advancing
with a speed proportional to the thickness and hardness of the material.
• Slow down the advancement speed near the end of cutting.
• After having completed the cut, turn the engine off through the switch. Bring the engine back to its
original position.
18
3
10
4
0°
5
7