Montolit F1 BROOKLYN Instrucciones Para El Uso página 20

8.3 CORRECT USE - JOLLY
1
2
5
7
8
• Position the tile against the square. Lock the tile with Squeeze System (fig. 5/6).
• Press down to switch the driving handle and lock it.
• The correct position of the hands is shown in figure 9.
• Proceed to cutting by slowly positioning the diamond disk against the material to be cut, advancing
with a speed proportional to the thickness and hardness of the material.
• Slow down the advancement speed near the end of cutting.
• After having completed the cut, turn off the engine through the switch. Bring the engine back to its
original position.
20
3
9
4
6