Montolit F1 BROOKLYN Instrucciones Para El Uso página 24

16 LOCATION TROUBLESHOOTING
PROBLEM
The machine is not
working.
The engine starts with
difficulty.
The machine turns off
during working.
Water does not get to
the diamond disk.
The slider has exces-
sive play.
17 GUARANTEE
Valid for 2 (two) years from the date of sale (invoice or delivery note or sales tax receipt).
Breakdowns resulting from non-conforming use or normal wear are excluded from this guarantee.
Brevetti MONTOLIT has always employed and provided first choice materials. This is a commitment to seriousness and
commercial morality that elevates our company to the highest standard. The product's safety and warranty are a source
of pride for us. This operational reality is not just words, but a real and written guarantee. In fact, we ensure all of our
products against involuntary damage caused by accidents occurring as a result of a construction or manufacturing
defect, even after delivery and commercialization.
The descriptions and diagrams are intended to provide a simple means of illustration. The Company reserves the right, without prejudice to the essential
characteristics of the models described and illustrated here, to make any modifications it deems necessary for improvement or for any constructive or
commercial need at any time and without notice.
All total or partial reproductions of this document in any format or by any means or procedure, photographic or electronic, without prior authorization of
Brevetti MONTOLIT S.p.A. is prohibited. Each of these activities could lead to subsequent criminal proceedings.
24
CAUSE
• The plug is badly inserted in the power socket.
• The power cable is interrupted.
• There is no voltage at the outlet.
• The switch is damaged.
• The engine is not connected.
• The condenser is broken.
• The voltage indicated on the technical data tag
does not reach the motor.
• Excessive engine temperature.
• The pump is not working.
• The water level in the tank is too low.
• The tap is blocked.
• The water recirculation tube is bent or blocked.
• Clogged holes in the filter or in the pump rotor
cover.
• Excessive wear.
REMEDY
• Push the plug into the outlet all the way.
• Consult the authorized service center or dealer.
• Consult the authorized service center or dealer.
• Wait for the engine to cool.
• Make sure that the pump is free of cutting de-
bris. If the pump needs to be substituted, con-
tact the authorized service center or dealer.
• Add water to the tank.
• Clean or replace the tab.
• Remove the water delivery tube from the pump
and blow into it. Clean or substitute it according
to its state of wear.
• Unblock all of the holes present in the filter and
pump rotor cover.
• Consult the authorized service center or dealer.