2. Insert the battery into the battery compartment as the positive and
negative marks indicate.
3. Turn the battery cover clockwise to tighten it.
Note:
Take the battery away if you do not use the device for a long time.
The battery type is 18650 with the protection board. The battery size
is 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery
capacity is 3200 mA.
Charge the battery for more than 4 hours before first use.
To ensure good conductivity, please use the cleaning cloth to clean the
thread of the battery compartment cover if it gets dirty.
3. Install Rail (Page 3 – C)
Steps
1. Turn off the device first. Align the installation holes on the device and
the rail.
2. Insert the screws.
3. Tighten the screws to secure the device.
Note:
Use the non-dust cloth to clean the device base and the rail.
4. Charge Device (Page 4 – D)
Steps
1. Turn on the device and make sure the hotspot function is disabled.
2. Lift the cover of data exchange interface.
3. Connect the device and power adapter with a type-C cable to power on
the device.
5. Connect to Mobile App (Page 4 – E)
Search and download HIKMICRO Sight on App Store (iOS System) or
Google Play™ (Android System), or scan the QR code to download and
install the App. After conneting the device to the mobile App, you can
view live view, set parameters, upgrade devices, and access albums on
the App.
6