Microphotography; Installing The C-Mount Adapter; Use Of Reflex Cameras - Optika Italy B-380 Serie Manual De Instrucciones

16. Microphotography

16.1 Installing the C-mount adapter

1. Loosen the clamping screw
move the dust cap ②. (Fig. 55)
2. Screw the C-mount adapter
the round dovetail of the C-mount into the empty hole of the
trinocular port, then tighten the clamping screw ①. (Fig. 56)
16.2 Use of reflex cameras
1. Insert the Reflex adapter ① into the relay tube to the
microscope ②.
2. Screw the "T2" ring ③ (not provided) to the reflex adapter.
3. Connect the Reflex camera
57).
4. Mount the other end of the relay tube
of the trinocular port, then tighten the clamping screw. (Fig.
55)
• "T2" ring is not provided with the microscope, but is
commercially available.
• While shooting dark specimens, darken eyepieces and
viewfinder with a dark cloth to minimize the diffused light.
• To calculate the
objective magnification * camera magnification * lens
magnification.
• If using an SLR camera, mirror movement may cause the
camera to vibrate.
• We suggest lifting the mirror, using long exposure times
and a remote cord.
on the trinocular port and re-
①
to the camera
③ ④
to the "T2" just installed (Fig.
④
into the empty hole
②
magnification of the
and insert
camera:
Page 35
③
④
③
①
②
①
F ig. 55 F ig. 55
④
F ig. 56 F ig. 56
②
F ig. 57 F ig. 57