Haier QPCA08 Instrucciones De Instalación Y Manual Del Usuario página 13

INSTALLATION INSTRUCTIONS
INSTALL MAIN WINDOW PANEL AND
3.
EXTENSION PANELS (cont )
4. For vinyl windows only.
Skip to step 6 for wood windows.
Place t he t wo top window bracket s and t wo bot tom
window bracket s where t hey will best support t he
extension panels. Use painted screws to at t ach top
bracket to t he support panels.
Before Assembly
Use only for vinyl
A
B
After Assembly
Attach with pointed screw(2).
5. Apply t he top foam st rip (provided) across t he
top of t he window panel assembly, and t hen
apply t he bot tom foam st rip (provided) across t he
bot tom front edge of t he window panel assembly, as
shown.
Typical Vinyl Window Installation
A
B
C
D
49- 5000543 Rev. 2
A
B
E
INSTALL MAIN WINDOW PANEL AND
3.
EXTENSION PANELS (cont )
6. Place t he window panel assembly in t he window, and
using t he screws provided, fasten t he assembly to t he
window sill and window frame.
7. Using one pointed screw, inst all t he Securit y bracket to
t he window.
NOTE: The securit y bracket prevent s t he window from
being opened from t he out side.
A
B
At t ach Exhaust Hose t o t he Exhaust
4.
Nozzle
1. Grasp bot h ends of t he exhaust hose and gent ly pull
t o expand fully t he ends of t he hose. Not e: Do not
at t ach mult iple hoses t o ext end t he lengt h, t his would
decrease t he cooling efficiency and may cause damage
t o t he air condit ioner.
2. Turn hose clockwise and screw int o t he nozzle in t he
window panel. At t ach adapt er t o ot her end of hose by
t urning clockwise.
13