English - i.safe MOBILE IS330.1 Manual Del Usuario

ENGLISH

EX MARKINGS
ATEX:
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135°C Db IP6X
EU Type Examination Certificate:
EPS 19 ATEX 1 073 X
CE-designation: 2004
IECEx:
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db IP6X
IECEx Certificate: IECEx EPS 19 .0036X
UKCA:
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135°C Db IP6X
CML 21UKEX2492X
UKCA-designation:
EX-RELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood manual, safety instructions and certificate .
The following safety regulations must also be complied with:
Inside ex-hazardous areas the covers of all interfaces must be closed .
To ensure the IP64-protection, it has to be ensured that all gaskets are present
and functional . There must be no large gap between the two halves of the housing .
The device may only be charged outside ex-hazardous areas using the i.safe PROTECTOR 2.0
USB (type C)-cable or other equipment approved by i.safe MOBILE GmbH .
The USB interface (type C) can be used for data transmission in non-hazardous areas . It is not
permitted to open the USB interface cover in hazardous locations .
The ISM interface of the device can be used within hazardous areas with approved headsets,
Remote Speaker Microphones (RSM) and add-ons .
For the ISM interface-connection the intrinsically safe approved accessories must comply with
entity parameters according to document 1029AD04 - i .e . Headset IS-HS1.1 is approved to be
used on ISM interface .
If the ISM interface is not used, it must be securely closed by the cover provided for this
purpose .
The device may only be charged at ambient temperatures between +5°C . . . +35°C .
The device may not be exposed to any aggressive acids or alkalis .
The device may only be used in zones 1, 2, 21, or 22 .
2503
North America:
Class I Div 1 Groups A, B, C, D, T4
Class II Div 1 Groups E, F, G , T135˚C
Class III Div 1
CSA20CA70220247
Temperature range:
-20°C ... +60°C (EN/IEC 60079-0)
-10°C ... +50°C (EN/IEC 62368-1)
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
EN 3