Motorola MDHTN3001 Guia Del Usuario página 10

2. Ensure that the transformer is plugged into an appropriate AC
outlet, and that the transformer cable is plugged securely into
the charger socket.
Blinking Red LED Indicator?
1. Remove the battery from the charger, and:
a. make sure that it is a Motorola authorized battery listed in
Table 1. Other batteries may not charge.
b. remove power from the battery charger and, using a clean
dry cloth, clean the gold metal, charging contacts of the
battery and charger.
2. Power up the charger and place the battery back into the
charger pocket. If the LED indicator continues to blink red,
replace the battery.
Blinking Yellow LED Indicator?
• the battery temperature may be below 5 °C (41 °F) or above
40 °C (104 °F).
• the voltage may be lower than the predetermined threshold
level for rapid charging.
Note: Rapid charging outside of the stated temperature and
voltage limits can drastically reduce the life expectancy of
the battery.
Note: When the battery charger detects the proper battery
conditions, rapid charging begins automatically (steady red
LED).
Service
The Single-Unit Chargers are not repairable. Order replacement
chargers as necessary.
8