Complete Installation; Description Of The Hood - arietta ATS436SSB Guía De Instrucciones Para Instalación

I WARNING
ELECTRICAL SHOCK HAZARD.
I
WARNING
ELECTRICALLY GROUND BLOWER.
CONNECT GROUND WIRE TO GREEN AND YELLOW GROUND
WIRE IN TERMINAL BOX. FAILURE TO DO SO CAN RESULT IN
DEATH OR ELECTRICAL SHOCK.
7. Connect green (or bare) ground wire from home power supply
to yellow-green ground wire (F) in terminal box using UL listed
wire connectors.
8. Tighten strain relief screw.
9. Install terminal box cover.
10. Reconnect power.

Complete Installation

Install duct covers
• When using both upper and lower vent covers, push lower
cover down onto hood and lift upper cover to ceiling and
install with two mounting screws.
NOTE: For vented installations, the upper vent cover may be
reversed to hide slots.
A
B
C
D
C
A. Upper vent cover
B. Lower vent cover
C. 4 x 8 mm screws
D. Bracket
• Secure the bottom of the duct with 2 - 4 x 8 mm screws.
• For non-vented (recirculating) installations only, install charcoal
filters over metal grease filter. See the "Mainteinance" section.
• Install metal filters. See the "Mainteinance" section.
To get the most efficient use from your new range hood, read the
"maintenance" section.
Keep your Use, Care, and installation Guide close to range hood
for easy reference.

Description of the Hood

C
D
8
B
A
A. Grease filter
B. Grease filter handle
C. Blower and light controls
D. LED lamps