Using The Hdmi Input - Pioneer KRP-500A Manual De Instrucciones

10 Using with other equipment
Item Description
Always Output Outputs composite video and audio signals no matter
which input source is selected
INPUT 1 Prohibit Does not output composite video and audio signals
when "INPUT 1" is selected
INPUT 2 Prohibit
Does not output composite video and audio signals
when "INPUT 2" is selected
INPUT 3 Prohibit Does not output composite video and audio signals
when "INPUT 3" is selected
INPUT 4 Prohibit Does not output composite video and audio signals
when "INPUT 4" is selected
INPUT 5 Prohibit Does not output composite video and audio signals
when "INPUT 5" is selected
INPUT 6 Prohibit
Does not output composite video and audio signals
when "INPUT 6" is selected
5 Press HOME MENU to exit the menu.
Note
• The INPUT 3 (when the HDMI function is in use), INPUT 4 and
INPUT 5 video signals are not output from the MONITOR OUT
terminal regardless of this setting.

Using the HDMI Input

The INPUT 3, INPUT 4 and INPUT 5 terminals are HDMI terminals
to which digital video and audio signals can be input. To use the
HDMI terminals, activate the terminal and specify the types of
video and audio signals to be received from the connected
equipment. For the types of these signals, see the operation
manual that came with the connected equipment.
Before starting the menu, press INPUT 3, INPUT 4 or INPUT 5 on
the remote control unit or press INPUT on the Media Receiver to
select "INPUT 3", "INPUT 4" or "INPUT 5".
Video signals supported
720 (1440) x 576i@50 Hz
720 x 576p@50 Hz
1280 x 720p@50 Hz
1920 x 1080i@50 Hz
720 (1440) x 480i@59.94 Hz/60 Hz
720 x 480p@59.94 Hz/60 Hz
1280 x 720p@59.94 Hz/60 Hz
1920 x 1080i@59.94 Hz/60 Hz
1920 x 1080p@24 Hz
1920 x 1080p@50 Hz
1920 x 1080p@60 Hz
48
En
All manuals and user guides at all-guides.com
PC signals supported
640 x 480 (VGA) 60 Hz
800 x 600 (SVGA) 60 Hz
1024 x 768 (XGA) 60 Hz
1360 x 768 (Wide - XGA) 60 Hz
1280 x 1024 (SXGA) 60 Hz
For audio, the system supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
HDMI Control supported
The flat screen TV supports the HDMI Control functions. By
connecting devices that support the HDMI Control functions to the
Media Receiver, you can control the connected device(s) from the
Media Receiver or remote control unit of the flat screen TV. See
Using the HDMI Control on Chapter 11.
Deep Color supported
Deep Color means the color depth that describes the number of
bits used to represent the color of a single pixel in a bitmapped
image. Besides the conventional RGB/YCbCr16 bit/20 bit/24 bit
signals, the flat screen TV also supports RGB/YCbCr30 bit/36 bit
signals. This enables finer, minute color reproduction when a
device that supports Deep Color signals is connected to the Media
Receiver. When Deep Color signals are received, the color depth
appears on the channel display.
• It may take a short while until the image is displayed,
• Make sure to use an HDMI compliant cable.
• When inputting 1080p signals, we recommend you use an
• When connecting a PC to the HDMI terminal, use the HDMI
• When connecting a PC to the HDMI terminal using a DVI
• PC picture and/or sound may not be displayed or heard
Note
depending on the equipment connected.
HDMI cable that supports HDMI Category 2.
compliant PC or video card.
output terminal, the flat screen TV may not display properly. If
that is the case, consult with your PC manufacturer.
properly depending on the PC used.