Descargar Imprimir esta página

Pioneer KRP-500A Manual De Instrucciones página 60

Ocultar thumbs Ver también para KRP-500A:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

11
Using the HDMI Control
Connecting a DVD recorder
Media Receiver (rear)
HDMI compliant cable
(HDMI cable having the
HDMI mark)
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the flat screen TV is
as follows: recorder x 2, player x 2, AV system x 1.
• When connecting an AV system, be sure to place and connect
it between the Media Receiver and recorder or player.
• Do not connect an AV system that does not support the HDMI
Control functions between the Media Receiver and a recorder/
player, otherwise the HDMI Control functions may not operate
properly.
• When connecting an AV system that does not support the
HDMI Control functions and a player/recorder that supports
the HDMI Control functions to the Media Receiver, connect the
AV system to the MONITOR OUT terminal on the Media
Receiver using a stereo audio cable, and the recorder/player to
the HDMI terminal using an HDMI compliant cable (see the
illustration to the right).
• HDMI Control may not operate properly if you do not use an
HDMI cable that supports the HDMI Specification.
60
En
All manuals and user guides at all-guides.com
DVD recorder
Media Receiver (rear)
Stereo
audio cable
HDMI compliant cable
(HDMI cable having the
HDMI mark)
AV amp
• After making connections, enter the setting in "Input Setting"
for "HDMI Control Setting". Be sure that the setting is entered
in each HDMI input terminal to which the device is connected.
• Settings in the connected device(s) are also required to use the
HDMI Control functions. For details, see the operation manual
that came with the connected device(s).
• When a recorder is connected, its power is automatically
switched on as the Media Receiver is turned On to help make
the recording smoother.
• When the image from a BD/DVD player or DVD recorder
connected through an HDMI Control supported AV system is
switched to display on sub screen in the 2-screen or picture-in-
picture mode, the sub screen turns black without displaying
any image.
• For more information on the devices that support the HDMI
Control functions, check the Pioneer Web site (see back cover).
DVD recorder

Publicidad

loading

Este manual también es adecuado para:

Kuro kpr-500a