Cebora CP-162C Manual Del Usuario página 9

*
Art. 1904
Art. 2960
Art. 1988
Art. 1904
Art. 1997
Art. 1904
Art. 1989
*
Fino a 40 A non è previsto l'uso dello shield
*
The use of the shield is not envisaged up to 40 A
5.3 REPLACING THE WELDING TORCH BODY
THIS SECTION IS RESERVED TO SKILLED PERSONNEL
ONLY.
5.3.1 Replacing the welding torch body CP162C MAR
• Unscrew the 6 screws V Fig.3 and remove the LH grip.
• With reference to Fig.4, lift the welding torch body T with
cable and disconnect connector A (push-button) and
All manuals and user guides at all-guides.com
25-40 A
Art. 2742
70 A
Art. 2719
110 A
Art. 1979
Art. 2720
130 A
Art. 2721
60-130 A
Art. 2722 Art. 1979
25-40 A
Art. 2742
70 A
Art. 2719
110 A
Art. 1979
Art. 2720
130 A
Art. 2721
Art. 1133
Art. 1398
Art. 1619
Art. 2362
Art. 2362
Art. 2362 Art. 1619 Art. 1398
connector B (pilot arc) making sure that the push-button
components (see Fig. 5) remain in the original position.
•Remove heat-shrinking hose C and unscrew nut D
(wrench #13) by keeping i tting E (wrench #11) fastened.
• Replacing the welding torch body.
• Screw in i ttings
D and E according to the arrow
direction - Fig. 6.
• Tighten i ttings, introduce the heat-shrinking hose C
and use a small heat source to warm it up.
Art. 2444
Art. 1132
Fig. 1
9