Publicidad
Idiomas disponibles
Idiomas disponibles
Ex Approvals
Special Conditions for Safe Use
ATEX
0537
The permissible ambient temperature range is -10 °C ≤ T
The calibrator shall only be used with rechargeable battery pack type
RB-796-Ex.
The battery pack shall not be charged on a hazardous location.
Use only Beamex charger type BC15-Ex for charging. The charger shall not
be used in a hazardous location.
The USB connection may be used in safe area only.
In hazardous area: The PX connection shall only be connected with the
EXT-IS or EXT-s-IS external pressure calibration module. However, in safe
area, non-IS EXT modules may also be used.
The calibrator may be used with auxiliary hand held mechanical pressure
calibrator pump type PGM.
The surface of the external pressure module and the calibrator pump con-
tains light metal, so the user shall be aware of possible impact or friction
sparks when using these auxiliary devices.
It is recommended to adjust the wrist strap in the safe are only.
The connection cable of the external pressure module as well as the pres-
sure measurement hose are non-conducting material, so the user shall be
aware of dangers of ignition due to hazardous electrostatic charges.
Before entering Ex area, please remove the non-conductive film that pro-
tected the display during shipment
Due to electrostatic discharge hazard, do not affix any stickers larger than
4 cm
(0.62 in
) to the calibrator.
2
2
To prevent ignition of a hazardous atmosphere, batteries must only be
charged on an area known to be nonhazardous.
Capacitance of the metallic parts is 110 pF. This shall be taken into account
in handling the device.
3
Ex ia IIC T4 Ga
(T
= -10 ... +50°C)
a
EESF 18 ATEX 071X
IECEx
Ex ia IIC T4 Ga
(T
= -10 ... +50°C)
a
IECEx EESF 18.0033X
≤ +50 °C.
a
Publicidad
