Publicidad
Idiomas disponibles
Idiomas disponibles
To stop the flow:
Tighten the drain filter.
When no more water comes out:
Unscrew and pull out the entire filter.
Clean the filter.
Verify that the drain pump propeller rotates
easily. Remove any debris and clean the inside
if there should be any.
Replace the drain pump filter and screw it firmly.
!
Warning! If the fil-
ter is not reinserted or
screwed
could spill from the ma-
chine.
28
39601005005 - Mutilingua Pittogrammi.indb 28
Figure 21
tightly,
water
DETErGENT DrAWEr CLEANING
Having removed the detergent drawer, take
away the steam vent plate as shown in photo
below.
Figure 22
A
b
C
If it is clogged by foreign bodies or detergent, it
is advisable to break it small fragments taking
care not to push the lumps to the bottom to
prevent clogging of the internal circuit. Note
that the detergent is removed easily if treated
with hot water.
06/07/2018 17.44.21
Publicidad
