Mounting; Mounting The Radiator Thermostat - HomeMatic IP HmIP-eTRV-B-2 Manual De Instalacion Y Uso

Start-up
5.2

Mounting

Please read this entire section before starting to mount the device.
The Homematic IP Radiator Thermostat is easy to install, and can be done
without draining heating water or intervening in the heating system. No
special tools are required, nor does the heating have to be switched off.
The union nut (A) attached to the radiator thermostat can be used
universally and without accessories for all valves with a thread size of
M30 x 1.5 from the most popular manufacturers such as
• Heimeier
• MNG
• Junkers
• Landis&Gyr (Duodyr)
• Honeywell-Braukmann
• Oventrop
• Schlösser
• Comap
• Valf Sanayii
• Mertik Maxitrol
• Watts
• Wingenroth (Wiroflex)
• R.B.M
• Tiemme
• Jaga
• Siemens
• Idmar
By means of the adapter in the delivery, the device can be installed also
on radiator valves of type Danfoss RA (see see „5.1.1 Direct pairing with a
Homematic IP device" on page 37).
5.2.1

Mounting the radiator thermostat

In case of visible damage of the existing radiator, valve or heating
pipes, please consult a specialist.
40