HomeMatic IP HmIP-eTRV-B-2 Manual De Instalacion Y Uso página 51

*If empty batteries are not replaced, the radiator thermostat moves to a "valve error
position". This avoids that the set temperature in the room cannot be reached any
more due to a low battery. A valve error position of 15 % is set in the factory settings.
Lock symbol ( ) Operating lock activated
Antenna
symbol ( ) flas-
hing
Short orange
flashing
1x long green
lighting
1x long red ligh-
ting
Short orange
flashing
(every 10 s)
Fast orange
flashing
Communication problem with
Homematic IP Access Point or
connected device
Radio transmission/attempting
to transmit/configuration data is
transmitted
Transmission confirmed
Transmission failed or duty cycle
limit is reached
Teach-in mode active
Direct teach-in mode active
Troubleshooting
Deactivate the
operating lock via
the app.
Please check the
connection with
the Homematic IP
Access Point or the
connected devices.
Wait until the
transmission is
completed.
You can continue
operation.
Please try again
(see sec. see „9.2
Command not
confirmed" on
page 49 or see
„9.3 Duty cycle" on
page 50).
Please enter the
last four numbers
of the device serial
number to con-
firm (see see „5.1.2
Teaching-in to the
Access Point (al-
ternative)" on page
38).
Activate the teach-
in mode of the
device you want to
teach-in (see see
„5.1.1 Direct pairing
with a Homematic
IP device" on page
37)
51