Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE FILTER PUMP
On/Off button/Wi-Fi toggle
This button has two functions:
- On/off function: To start or stop the pump.
- Wi-Fi activation function: For more information, please refer to Wi-Fi operation instructions.
Time setting button
During the set-up operation, the display will flash. Every time you push the set-up button, the timer will decrease by 1 hour.
When you reach the desired time, don't push any buttons for 5 seconds. The display light will stop flashing. The set-up is
finished.
Wi-Fi indicate light
This LED indicates the status of the Wi-Fi connection. Check the Wi-Fi Indicator Light Definitions section for the different
statuses of this LED.
• After setting the run time, the pump will restart automatically at the same time the following day.
• In case of a power outage or power cord loosening, the running time of the product will be reset to a 10 hour default.
Filter cartridge status indicator / Low flow rate
Filter indicator on: The filter element is dirty, or the system has detected a low flow rate. Follow the troubleshooting instructions
to reset the element.
Digital display
" - - " indicates 'Standby Status' - Press the On/Off button
Wi-Fi Indicator Light Definitions
Indicator Display
WiFi indicator light on
WiFi indicator light off
WiFi indicator flashes quickly
WiFi indicator flashes slowly
Wi-Fi indicator only indicates the state of connection between the pump and the wireless router. When your Wi-Fi indicator
lights up but the device in the app is offline, please check whether your wireless router network is malfunctioning.
MAINTENANCE
• Make sure that the Filter Pump is unplugged before any maintenance.
• For the maintenance instructions, refer to illustration steps
only. May not reflect actual product. Not to scale.
• To optimize the Filter Pump performance and for sanitary reasons, we suggest replacing the filter cartridge with a new
one every two weeks.
STORAGE
• Remove all accessories; be sure that Filter Pump, hoses and debris screens are completely clean and dry before the storage.
If all the parts are not completely dry, mold may result.
• Before storage, remove and dispose of the filter cartridge.
• We strongly recommend disassembling the Filter Pump when the environment temperature is below 10ºC / 50ºF.
• Store the Filter Pump in a dry place with a moderate temperature between 10ºC / 50ºF and 38ºC / 100ºF.
WARRANTY TERMS
For information concerning warranty terms, visit our website at: www.bestwaycorp.com
to access the pump's set run timer.
Definition
Connected to the router
Light damaged / Wi-Fi module has problem
Lost Wi-Fi signal
Waiting to connect to the router
inside the manual. Drawings are for illustration purposes
6
Publicidad
