Configuration Menus - VMB Dimmers DS-Pro Manual De Usuario

VMB Española S.A.

Configuration menus.-

The Dimmer DS-Pro is provided with a LCD display that shows the diverse configuration menus.
These menus allow to store and modify the functionning options of the Dimmer as well as to save data
and have access to them.
Here are these menus:
Each one has a series of submenus allowing a complete and easy configuration of use of the
Dimmer. When switching on the Dimmer the sarting menus appear:
When switching on the Dimmer, the elements of the (permanent) non volatil memory will be kept
in the working memory. If for any reason this step was not done satisfactorily, an error message would
appear:
If you want to leave a menu or a submenu, press the function key
will appear on the display:
- 01.- TEST
- 02.- PRE-HEAT
- 03.- CURVES
- 04.- MAX OUT LEVEL
- 05.- PROGRAM
- 06.- DMX ADDRESS
- 07.- PASSWORD
- 08.- INPUT SIGNAL
- 09.- SCENE
- 10.- DMX TYPE
- 11.- SWITCH MODE
VMB Española, SA
v3.32 (c) 2004
Lv:
DMX 512: 86 Norm
Memory ERROR
DEFAULT system
Memory ERROR
NO saving
wait a moment
Saving...
Lv:
DMX 512: 86 Norm
FUNCTIONNING PRINCIPLES
Menu of introduction
Access programming menu: press Function key
get to the detailed configuraton of the Dimmer´s functions.
The Dimmer will start with the configuration options of
the manufacturer (DMX Address:001). If the Dimmer had
some difficulties when saving data in the memory, the
following message would appear:
The Dimmer will work but the modifications will not be
kept in the memory.
The fact that this message appear on the display means
that the modifications will be kept in the Dimmer memory.
You can go on working. The next menu window will be:
to
(UP), the next message
pag. 17