Programming Examples - VMB Dimmers DS-Pro Manual De Usuario

VMB Española S.A.

4.- PROGRAMMING EXAMPLES

- How to get a general PRE-HEAT at 20% except on channels 8 and 9 where
we don´t want any.
When you are on the main screen, press
options; the first to appear is TEST.
Press the arrow
Once you are in the PRE-HEAT option, Press
appears below the symbol `--'. This cursor indicates the channel
in which you are (in this case: All). Pressing only once the
key increases by 1% the pre-heating of all the channels. But if
you maintain the key pressed, the pre-heating will go on
increasing automatically. Let´s press the key until we reached
a pre-heating at 20%.
Once all the channels have been pre-heated, let´s cancel the
pre-heating of channels 8 and 9. For that, press once on the key
cursor passes to Ch2. Press the key until you get to Ch8. When
on channel 8, press the key
to cancel channel 9: press the key
and then press again on
finished the process, press
then press twice
to get to the next option.
. The cursor passes from All to Ch1. If you press again the
. Now the dimmer is ready to start again.
to get to the diverse
. The cursor
to get to 0%. Repeat this process
to move to channel 9,
to get to 0%. When you have
to leave the edition menu and
PROGRAMMING EXAMPLES
Lv:
DMX Address: 001
1. Test
All Ch1 Ch2 Ch3
2. Pre-Heat (%)
All: - - Ch1: 00
2. Pre-Heat (%)
Ch2: 20 Ch3: 20
2. Pre-Heat (%)
Ch8: 00 Ch9: 00
pag. 31