VMB Dimmers DS-Pro Manual De Usuario página 33

VMB Española S.A.
- How to cancel the functionning of the Dimmer´s channel 3 and change the
starting curve channel 8 into a potentially lineal curve.
When in the main screen, press
options; the first one to appear is TEST.
Press the arrow
Once you are in the curves option, press
cursor appears just under -- which indicates which channel
we are working with. ( In this case All).
Press three times the key
will change and channels 2 and 3 will be shown on display.
Now press the key
Afterward will move to the next channel pressing 5 times the
key . The cursor passes from Ch3 to Ch8. Let´s press the
key
finished, press
to get the Dimmer ready to start working again.
to get to the curves option.
to move to channel 3. The screen
until the word No appears; (No start).
until Li (Lineal) appears on display. Once you have
to quit the edition. Then press three times
to enter in the different
to get into it. The
PROGRAMMING EXAMPLES
Lv:
DMX Address: 001
1. Test
All Ch1 Ch2 Ch3
3. Curves
All: - - Ch1: St
3. Curves
Ch2: St Ch3: No
3. Curves
Ch8: L i Ch9: St
pag. 33