Basic Mode - Mitsubishi Electric CITY MULTI PEFY-W-VMS-A Manual De Instrucciones

Display
The main display can be displayed in two different modes: "Full" and "Basic."
The factory setting is "Full." To switch to the "Basic" mode, change the setting on the Main display setting.
▌ Full mode
* All icons are displayed for explanation.
㉓ ⑫ ⑬ ⑭ ⑮ ⑯
㉒
⑥
⑦
⑧
⑨
⑩
①
⑪
㉑
▌① Operation mode
▌② Preset temperature
▌③ Clock
See the Installation Manual.
▌④ Fan speed
▌⑤ Button function guide
Functions of the corresponding buttons appear here.
▌⑥
Appears when the ON/OFF operation is centrally controlled.
▌⑦
Appears when the operation mode is centrally controlled.
▌⑧
Appears when the preset temperature is centrally controlled.
▌⑨
Appears when the filter reset function is centrally controlled.
▌⑩
Indicates when filter needs maintenance.
▌⑪ Room temperature
See the Installation Manual.
▌⑫
Appears when the buttons are locked.
▌⑬
Appears when the On/Off timer, Night setback, or Auto-off timer function is
enabled.
appears when the timer is disabled by the centralized control system.
▌⑭
Appears when the Weekly timer is enabled.
VG79D811H03
⑰ ⑱
③
⑲
⑳
④
②
⑤

▌ Basic mode

㉓
㉒
①
▌⑮
Appears while the units are operated in the energy-save mode. (Will not
appear on some models of indoor units)
▌⑯
Appears while the outdoor units are operated in the silent mode.
▌⑰
Appears when the built-in thermistor on the remote controller is activated to
monitor the room temperature ( ⑪ ).
appears when the thermistor on the indoor unit is activated to monitor the
room temperature.
▌⑱
Indicates the vane setting.
▌⑲
Indicates the louver setting.
▌⑳
Indicates the ventilation setting.
▌㉑
Appears when the preset temperature range is restricted.
▌㉒ Centrally controlled
Appears for a certain period of time when a centrally-controlled item is
operated.
▌㉓ Preliminary error display
An error code appears during the preliminary error.
Most settings (except ON/OFF, mode, fan speed, temperature) can
be made from the Main menu.
3
②
⑤
③
④