Listening To Bluetooth - Victor STATE VWRP-3800 Manual De Operación

LISTENING TO BLUETOOTH

You can listen to an external Bluetooth
1. Turn the unit ON by pressing the POWER button.
2. Set the FUNCTION KNOB to the FM/
3. Select (Bluetooth) using the switch. The FM ST/BT indicator starts blink in blue which
indicates the unit is ready to establish the Bluetooth connection.
4. Ensure that the Bluetooth function is activated in your player (e.g. mobile phone).
5. Pair your external Bluetooth
devices. If prompted, please enter the password "0000" on your device.
6. A beep will be heard and the FM ST/BT indicator turns to solid blue, which indicate the
Bluetooth connection is established.
7. Turn the VOLUME KNOB to adjust the volume.
Note:
Because of different device manufacturers, models, and software versions, the playback control
buttons (Play/Pause, Previous, Next, Stop) on the faceplate will NOT always function when the
Wooden Music Center is in Bluetooth mode. Use the control buttons on your external device.
Bluetooth Transmitter
®
You can play music on the VWRP-3800 and listen to it on external Bluetooth
headphones.
1. Disable the Bluetooth function on all devices nearby (e.g. amplifier, sound bar, wireless
headphone, smart phone, iPad).
2. Play music while in CD, FM Radio, Phono, or AUX mode as described above.
3. Press and hold STOP/PAIR Button till the FM ST/BT indicator starts to blink in blue.
4. Power on your Bluetooth
5. After a few seconds, your turntable will connect to your device and the FM ST/BT indicator turns
to solid blue.
6. Adjust the volume on your device to desired level.
device on the VWRP-3800 built-in speakers.
®
position.
device with the "VICTOR VWRP-3800" shown in the list of
®
® device activate its Bluetooth function.
13
®
speakers, stereo, or
®