Descargar Imprimir esta página

Frequently Asked Quetions/ Troubleshooting - VITO PRO-POWER VIBCAIBSFL20 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

FREQUENTLY ASKED QUETIONS/ TROUBLESHOOTING

Question/Problem - Cause
The impact wrench does not start when you press the
ON/OFF switch:
• The battery is discharged;
• ON/OFF switch electrical contacts are not in good
condition or it does not work;
The ON/OFF switch is locked:
• The forward/reverse button is in the center
position;
The motor makes an abnormal sound, starts
intermittently or runs slowly:
• ON/OFF switch electrical contacts are damaged;
• Mechanical parts are blocked;
• The impact wrench is running over excessive
pressure, overloaded motor;
Impact wrench overheats:
• Overloaded appliance;
• Poor assembly of the housing or pieces inside the
impact wrench;
Solution
• Charge the battery;
• Repair or replace the switch;
• Select the direction of rotation;
• Repair or replace the switch;
• Inspect the mechanical parts;
• Reduce the pressure applied;
• Reduce the pressure applied;
• Check if there is any blockage;
29

Publicidad

loading