Descargar Imprimir esta página

Helvex PIURA PIU-201 Guia De Instalacion página 6

Publicidad

Posibles Causas y Soluciones / Troubleshooting
Problema
/ Problem
Existe poco flujo de agua.
/ There is low water flow.
Hay fuga en las conexiones.
/
There are leaks in the connections
El maneral está flojo.
/ The handle is loose.
Participa en nuestros
cursos gratuitos
de capacitación.
Enter our free
training courses.
Recomendaciones de Limpieza / Cleaning Recommendations
Es muy importante seguir las siguientes instrucciones para conservar los
acabados de los productos HELVEX, con brillo y en perfecto estado:
1. Utilice únicamente agua y un paño limpio.
2. No utilice fibras, polvos, abrasivos, ni productos químicos.
3. No utilice objetos punzo-cortantes para limpiar los acabados.
4. Se recomienda realizar la limpieza de su producto diariamente.
Visite nuestras páginas www.helvex.com.mx para México y www.helvex.com
para el mercado Internacional
HELVEX, S. A. DE C. V. Calzada Coltongo # 293, Col. Industrial Vallejo, Alcaldía Azcapotzalco, C. P. 02300, Ciudad de México.
Causas
/ Causes
El cartucho puede estar obstruído.
/ The cartridge may be clogged.
La presión de operación no es la adecuada.
/ The operating pressure is not adequate.
Las conexiones no están apretadas correctamente.
The connections are not tightened correctly.
No se colocó cinta teflón en las conexiones.
Did not place plumber's tape on the connections.
El opresor no está apretado.
/ The setscrew is not tight.
Comunícate:
Contact:
En la Ciudad de México:
In Mexico City:
(52) 55 53 33 94 00
Ext. 5806, 5805 y 5804
Limpie o reemplace el cartucho (Pág. 5, pasos 22, 23 y 24).
Clean or remplace the cartridge (Page 5, steps 22, 23 and 24).
Verifique la presión mínima requerida (Pág. 1).
/ Check the minimum pressure required (Page 1).
/
Apriete firmemente las conexiones (Pág. 2, paso 3).
Thigtened the connections firmly (Page 2, step 3).
Coloque cinta teflón en las conexions (Pág. 2, paso 3). /
/
Place the plumber's tape on the connections (Page 2, step 3).
Apriete firmemente el opresor (Pág. 3, paso 11).
/ Tighten the set screw firmly (Page 3, step 11).
En Monterrey:
En Guadalajara:
In Monterrey:
In Guadalajara:
81 83 33 57 67
33 36 19 01 13
81 83 33 61 78
It is very important to follow the instructions below to preserve HELVEX products
finishes, shiny and in perfect condition:
1. Use only water and a clean cloth.
2. Do not use fibers, powders, abrasives, or chemicals.
3. Do not use sharp objects to clean the finish.
4. It is recommended to clean your product daily.
Visit our pages www.helvex.com.mx for Mexico and www.helvex.com
for the International market.
Soluciónes
/ Solutions
/
/
6

Publicidad

loading

Este manual también es adecuado para:

Vertika e-701Premier e-703