Operation - Sunbeam Products Oster OS-WSMD16S Manual De Instrucciones

1 Press the "Power" button to turn on the power.
2 Press the "Program" button to select the appropriate full-automatic program.
a. When the power is turned on, the washing machine is automatically set to an
"Smart" program. If you need to select other fully automatic programs, you can
press the "program" button to turn on the corresponding program lights.
3 Press "Water level" button to select the appropriate water level.
a. After the power is turned on, the washing machine is automatically set to a
fuzzy function without water level display. If you need to choose other water level,
you can press the "water level" button to choose it.
b. When the power is turned on, if there is water in the laundry barrel, the
washing machine cannot enter the fuzzy function, and the default program is
"Smart".
4 If self-programming is needed, press the buttons of "washing", "rinsing" and
"spinning" separately to switch the different washing processes and adjust the time.
5 Press the "Start/Pause" button to start the system.
a.After the system starts, if you need to change the setting program, you can first
press the "Start/Pause" button to pause the system operation, then press other
buttons to set, and finally press the "Start/Pause" button, the system will run
according to the newly set program.
6 Close the lid and the washing machine goes into operation
Do not open the upper cover at will during the operation of the washing
machine, especially in the process of spinning, to avoid accidents.

OPERATION

English-11