Cleaning And Maintenance - VALBERG 971713 Instrucciones De Uso

C

Cleaning and maintenance

Cleaning and maintenance
CAUTION!
• To prevent the risk of electrocution, always turn off and
unplug the unit from the mains socket before cleaning it.
• Never immerse the main unit, or the power cable
(including the plug) in water or any other liquid. Never
rinse them under a tap.
NOTE: Under no circumstances should solvents, chemical
or abrasive cleaning agents, wire brushes, sharp objects
or scouring pads be used to clean the vacuum.
• Detach all the tools from the main unit before performing any
cleaning operations.
Main unit
Metal extension tube
Filters (all parts)
Flexible hose
Floor brush
2-in-1 folding brush
• After cleaning, thoroughly dry the unit and reposition all the
parts.
Use a slightly damp soft cloth to clean these. Make sure
that no liquid enters the main unit.
Tap to remove any excess dirt, then rinse under a tap. Shake
off any excess water and allow to air dry thoroughly.
Press the floor brush pedal to extend the bristles and make
the tool easier to clean.
When cleaning the brushes, make sure that all hair/fur is
removed from the bristles.
18 EN