Max Function - DIEL ME 200 E Manual De Instalacion Y Uso

ME 200 E
(not displayed for configurations 0)
C: Bearings Protection
Possible alarms activated per channel:

ICF/SCF: probe open or in short-circuit

Nr channel + dEr: channel that detected
dynamics incompatible with characteristics of
the transformer / engine.

n: number of times the alarm occurred.
After about two seconds from the last display, the
control unit returns to the normal operating status.
The MANUAL LED is off.
MANUAL: It displays for any of the 8 channels.
Press
The MANUAL LED is on.
SCAN: Display cyclically the temperatures of each
respective active channel.
The MANUAL LED flashes.
T. MAX FUNCTION
The keys
to access the T. MAX function. The message t MAX
appears on the display and the relative LED is on.
With the keys
maximum temperatures reached by each channel.
The maximum values are reset every time you enter
the programming phase.
To exit the function press
seconds.
- 25 -
to scroll through the channels.
must be pressed simultaneously
it is possible to view the
ENG
or wait a few